Chevrolet C/K 10-30, Blazer, Sburban (1973-1979) Service & Repair Manuals

Chevrolet / GMC Pick-ups (1967-1987) - including Suburban, Blazer & Jimmy (1967-1991) | Haynes Repair Manual

Haynes Repair Manual covering the:
- Chevrolet and GMC C/K 10, 20 and 30 full-size Pick-ups, 4x2 and 4x4 (1967-1987)
- Chevrolet Blazer, GMC Jimmy and Chevrolet Suburban (1967-1991).

Gasoline engines:
- 6 cylinders in line - 3.7 litre (230 cu in/3740 cc), 4.1 litre (250 cu in/4070 cc) and 4.8 litre (292 cu in/4750 cc)
- V6 - 4.3 L(260 cu in/4260 cc)
- V8 - 4.6 litre (283 cu in/4590 cc, Small-Block), 5.0 litre (305 cu in/4960 cc, Small-Block), 5.0 litre (307 cu in/4990 cc, Small-Block), 5.7 litre (327 cu in/5690 cc, Small-Block), 5.7 litre (350 cu in/Small-Block), 6.5 litre (396 + 402 cu in/6510 cc, big block) and 7.4 litre (454 cu in/7390 cc, big block).

Exclusions: This manual does not cover the GMC V6 - 305 cu in gasoline engine or the diesel engines.

This Haynes manual for the Chevrolet and GMC Pick-ups from 1967-1991 describes service and repair of the gasoline engines (distribution, belts, valves, camshaft, cylinder head, oil pump, seals, and crankshaft).
It also includes procedures for the cooling, air conditioning, fuel system, exhaust plus the starting and charging system.

Additionally, this DIY guide describes work on the clutch, gearbox (removal and installation), driveshafts, braking system, suspension, steering box, body, interior, and electrical system.

• Step-by-step instructions with hundreds of detailed photos guide you through every job.
• Based on a complete vehicle strip-down and rebuild.
• Includes a maintenance schedule, technical specifications, torque wrench settings, and troubleshooting tables.
• Clear and detailed wiring diagrams.

More information about Haynes manuals for US vehicles

Product details

Chevrolet / GMC Full-size Trucks - gasoline and diesel engines (1970-1979) | Chilton Repair Manual

Chilton Repair Manual for the Chevrolet and GMC C/K 1/2, ¾ and 1-ton, Pick-Up and Suburban, 4x2 (C-Series) and 4x4 (K-Series), gasoline and diesel engines.

Versions: Custom, Custom Deluxe, Scottsdale, Cheyenne, Cheyenne Super, Silverado / Sierra, Sierra Grande, High Sierra, Sierra Classic.

Gasoline engines:
- 6 cylinders in line - 250, 250 HD and 292
- V6 - 262
- V8 Small Block - 283, 305, 305 HD, 307, 327, 350, 400
- V8 Mark IV Big Block - 396, 402, 454 and 454 HD.

Diesel engines: V8 - 350 (Oldsmobile LF9).

Model years: 1970-1979.

This Chilton manual for the Chevrolet / GMC Full-size Trucks from 1970-1979 covers maintenance and repair of the gasoline and diesel engines (distribution, camshaft, inlet and outlet valves, cylinder head, crankshaft, lubricating system, and gaskets).
It also addresses the cooling system, air conditioning, fuel system, exhaust, and the electrical system.

Additionally, this guide describes work on other components, such as the clutch, transmission (only removal and installation), the transfer case, front and rear axles, springs and shock absorbers, the steering system, brakes and body.

• Includes technical specifications, adjustment data, torque wrench settings, and wiring diagrams.
• Tables for troubleshooting and identification of models and engines.

More information about Chilton Repair Manuals

Product details

Chevrolet Blazer / GMC Jimmy - gasoline and diesel engines (1969-1982) | Chilton Repair Manual

Chilton Repair Manual for the Chevrolet Blazer and GMC Jimmy, 4x2 and 4x4, gasoline and diesel engines.

Model years: 1969-1982.

This Chilton manual for the Chevrolet Blazer and GMC Jimmy covers maintenance and repair of the gasoline and diesel engines (timing gear, camshaft, inlet and outlet valves, cylinder head, crankshaft, lubricating system, and gaskets).
It also addresses cooling, air conditioning, fuel system, exhaust, and the electrical system.

Additionally, this guide describes work on other components, such as the clutch, transmission (only removal and installation), front and rear axles, springs and shock absorbers, the steering system, brakes and body.

• Includes technical specifications, adjustment data, torque wrench settings, and wiring diagrams.
• Tables for troubleshooting and identification of models and engines.

More information about Chilton Repair Manuals

Product details

Chevy / GMC Trucks (1973-1987) - How to Build and Modify

GM's squarebody trucks are durable, simple, and widely available, making them ideal for modification. These American classics have become the modern hot rods for a new generation.

Veteran editor Jim Pickering examines why these trucks are popular and details modifications to update their classic appearance and performance. The book reviews all major systems and provides guidance to create a truck that is fast, safe, visually appealing, and reliable for everyday use.

Produced in large numbers over an 18-year run, squarebody trucks are easy to find, but selecting a good starting point and planning the build are essential.

Topics include sourcing a truck, LS engine installations, air suspension and coilover setups, automatic and manual transmissions (including six-speed conversions), cooling upgrades, integrating modern alternators, converting mechanical clutches to hydraulic systems, new fuel and brake lines, 4-link rear suspension, under-bed fabrication, exhaust construction, LED lighting, interior restoration, and more.

For anyone building a squarebody truck intended for regular driving, this book provides the most complete and authoritative guide available.

More information about CarTech Workbench books

Product details

How to Restore Your Chevy Truck (1973-1987) - Step-by-Step Restoration Procedures

Chevy's third-generation C/K pickups gained widespread popularity among Chevy and GMC enthusiasts, selling millions over an 18-year production run. The redesigned cab featured rounded windshield corners, a curved roof, and sloped, rounded doors. While earlier models are rarer, third-generation trucks are plentiful, increasingly collectible, and supported by readily available parts.

Chevy and GMC trucks remain highly sought after for stock restorations, street performance, and off-road builds. Before undertaking a specialty project, a solid, reliable, restored truck is essential.
This guide covers all 1973-1987 Chevy trucks - regular, Super, and Crew cabs with short or long boxes - providing detailed instruction to restore your squarebody to original condition.

Veteran truck writer Kevin Whipps presents practical techniques for home restoration. The book guides readers in inspection, assessment, and budgeting, and covers all major areas: engine, suspension, chassis, bodywork, paint, brakes, steering, transmission, driveline, electrical system, interior, and more.
Special attention is given to replacing body panels, repairing the box and cab, and achieving professional-quality paint preparation, application, and finishing.

Product details

1973 Chevrolet Light Duty Truck Series 10-30 - Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the 1973 Chevrolet Series 10-30 pickups and trucks.

Models:
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- Luv Pickup
- P10 Van, P20 Van, P30 Van.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers, electric windows)
- body (welded components, bumpers, hood, fenders, doors, fixed windows, window mechanisms, seats, instrument panel, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 330-73.

Product details

1973 Chevrolet Passenger Car and 10-30 Series Light Duty Truck - Overhaul Manual

Official factory workshop manual (reprint) for overhaul of chassis components of the 1973 Chevrolet passenger cars and Chevrolet / GMC 10-30 Series pick-ups and vans.

Models:
- Bel Air, Camaro, Caprice, Chevelle, Corvette, El Camino, Impala, Laguna, Malibu, Monte Carlo, Nova
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- 4x4 system (transfer case and front axle)
- differential
- steering, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 333-73.

Product details

1974 Chevrolet Light Duty Truck Series 10-30 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1974 Chevrolet Series 10-30 pickups and trucks.

Models:
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 330-74.

Product details

1974 Chevrolet Passenger Cars and 10-30 Series Light Duty Truck - Overhaul Manual

Official factory workshop manual (reprint) for overhaul of chassis components of the 1974 Chevrolet passenger cars and Chevrolet / GMC 10-30 Series pick-ups and vans.

Models:
- Bel Air, Camaro, Caprice, Corvette, El Camino, Impala, Laguna, Malibu, Monte Carlo, Nova
- Blazer
- C10 Pickup, C10 Suburban, C20 Pickup, C20 Suburban, C30 Pickup
- G10 Van, G20 Van, G30 Van
- K10 Pickup, K10 Suburban, K20 Pickup, K20 Suburban, K30 Pickup
- P10 Van, P20 Van, P30 Van.

Covers disassembly and assembly of the major components:
- engine
- coolant pump
- carburators
- starter motor
- transmission and clutch
- 4x4 system (transfer case and front axle)
- differential
- steering, power steering pump and control valve
- master cylinder
- air conditioning compressor.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 333-74.

Product details

1977 Chevrolet Light Duty Truck Series 10-35 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1977 Chevrolet Series 10-35 pickups and trucks.

Models:
- C10, C10 Suburban, C20, C20 Suburban, C30
- G10, G20, G30
- K10, K10 Suburban, K20, K20 Suburban, K30
- K5 Blazer
- P10, P20, P30.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 330-77.

Product details

1978 Chevrolet Light Duty Truck Series 10-35 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1978 Chevrolet Series 10-35 pickups and trucks.

Models:
- C10, C10 Suburban, C20, C20 Suburban, C30
- G10, G20, G30
- K10, K10 Suburban, K20, K20 Suburban, K30
- K5 Blazer
- P10, P20, P30.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 330-78.

Product details

1979 Chevrolet Light Duty Truck Series 10-35 - Chassis Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the mechanical components of the 1979 Chevrolet Series 10-30 pickups and trucks.

Models:
- C10, C10 Suburban, C20, C20 Suburban, C30
- G10, G20, G30
- K10, K10 Suburban, K20, K20 Suburban, K30
- K5 Blazer
- P10, P20, P30.

Covers only the chassis (not the body):
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. GM reference: ST 330-79.

Product details