Ford F-Series Pickups & Bronco (1973-1979): repair manuals

Ford F-100 thru F-350 Pick-ups & Bronco (1973-1979) - Six-cylinder inline & V8 models | Haynes Repair Manual

Haynes Repair Manual covering the Ford F-100, F-150, F-250 and F-350 pick-ups / Bronco, 4x2 and 4x4.

Gasoline engines:
- 6 cylinders - 3.9 L (240 cu in) and 4.9 L (300 cu in)
- V8 - 4.9 L (302 cu in), 5.8 L (351 cu in), 5.9 L (360 cu in), 6.4 L (390 cu in), 6.6 L (400 cu in) and 7.5 L (460 cu in).

Model years: 1973-1979.

This Haynes manual for the Ford Pick-ups and Bronco from 1973-1979 describes service and repair of the gasoline engines (distribution, belts, valves, camshaft, cylinder head, oil pump, seals, and crankshaft).
It also includes procedures for the cooling, air conditioning, fuel system, exhaust plus the starting and charging system. Additionally, it describes work on the clutch, gearbox (removal and installation), driveshafts, braking system, suspension, steering box, body, interior, and electrical system.

• Step-by-step instructions with hundreds of detailed photos guide you through every job.
• Covers both U.S. and Canadian models.
• Based on a complete vehicle strip-down and rebuild.
• Includes a maintenance schedule, technical specifications, torque wrench settings, and troubleshooting tables.
• Clear and detailed wiring diagrams.

Product details

More information on the American Haynes Repair Manuals

Ford Pick-Ups and Bronco - gasoline and diesel engines (1976-1986) | Chilton Repair Manual

Chilton Repair Manual for the Ford models:
- F-100, F-150, F-250, F-350 (1976-1986)
- Bronco (1978-1986), 4x2 and 4x4.

Gasoline engines: 232 cu in (3.8 litre), 255 cu in (4.2 litre), 300 cu in (4.9 litre), 302 cu in (5.0 litre), 351 cu in (5.8 litre), 390 cu in (6.4 litre), 400 cu in (6.6 litre) and 460 cu in (7.5 litre).

Diesel engines: 420 cu in (6.9 litre).

Product details

More information on the Chilton Repair Manuals

1973 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1973 Ford pickups, vans and trucks.

Models:
- Bronco
- E-100 Econoline
- E-200 Econoline
- E-300 Econoline
- F-100, F-250, F-350, F-600, F-700, F-7000
- P-100, P-350
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: 36512773.

Product details

1974 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1974 Ford pickups, vans and trucks.

Models:
- B-100
- Bronco
- Ecoline and Club Wagon (E-100, E-200, E-300)
- F-100, F-250, F-350
- F-600, F-700, F-7000
- M-450
- P-350
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: 365-127-74A, 365-127-74B, 365-127-74C, 365-127-74D.

Product details

1975 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1975 Ford pickups, vans and trucks.

Models:
- Bronco
- Econoline and Club Wagon (E-100, E-150, E-250, E-350)
- F-100, F-150, F-250, F-350
- F-500, F-600, F-700, F-7000
- P-350, P-400, P-500
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: FPS 365-127-75 A-D.

Product details

1976 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1976 Ford pickups, vans and trucks.

Models:
- Bronco
- Econoline and Club Wagon (E-100, E-150, E-250, E-350)
- F-100, F-150, F-250, F-350
- F-500, F-600, F-700, F-7000
- P-350, P-400, P-500
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: FPS 365-127-76 A-D.

Product details

1977 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1977 Ford pickups, vans and trucks.

Models:
- Bronco
- B-100
- Econoline and Club Wagon (E-100, E-150, E-250, E-350)
- F-100, F-150, F-250, F-350
- F-500, F-600, F-700, F-7000
- P-500
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: FPS 365-127-77A-D.

Product details

1978 Ford Truck Shop Manual (5 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1978 Ford pickups, vans and trucks.

Models:
- Bronco
- B-100
- Econoline and Club Wagon (E-100, E-150, E-250, E-350)
- F-100, F-150, F-250, F-350
- F-600, F-700, F-7000
- heavy trucks.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: FPS-365-127-78A-D.

Product details

1979 Ford Bronco, F-100 - F-350 Truck - Electrical & Vacuum Troubleshooting Manual

Factory workshop manual (reprint) for maintenance and repair of the 1979 Ford Bronco and F-Series pickups. Describes how to detect and troubleshoot vacuum and electrical system faults (dashboard, lights, radio, windscreen wipers, etc).

Models:
- Bronco
- F-100, F-150, F-250, F-350.

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: 0339-521.

Product details

1979 Ford Truck Shop Manual (3 Volume Set)

Factory workshop manual (reprint, 5 volumes) for maintenance and repair of the 1979 Ford pickups, vans and trucks.

Models:
- Bronco
- B-100
- Econoline and Club Wagon (E-100, E-150, E-250, E-350)
- F-100, F-150, F-250, F-350
- F-600, F-700, F-7000
- heavy trucks: F-, B-, C- and L-600 - 9000 Series (except CL-9000).

Petrol engines: 6 cylinders in line and V8.

Diesel engines: Cummins, Detroit Diesel and Ford V-8.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater / air conditioning and exhaust)
- driveline (transmission, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, alternator, voltage regulator, headlights, tail lights, turn signals, dashboard, windscreen wipers, electric windows)
- body (welded components, bumpers, bonnet, fenders, doors, fixed windows, window mechanisms, seats, dashboard, interior trim, interior lamps).

• Clear, very comprehensive instructions with drawings, photos and specifications.
• High-quality reprint, licensed by Ford.
• This is the same technical manual as was used in the Ford dealership workshop at the time. Ford reference: FPS-365-32679-A, C, D.

Product details