Deze webpagina bevat betaalde links

Ford USA - V8 FE en 385 Big-Block motoren werkplaatshandboeken

Een werkplaaatshandboek voor de motor van uw Ford? Ontdek hier handleidingen voor Ford V-8 FE (1958-1976) en Series 385 (1968-1998) Big Block motoren. Ze bevatten gedetailleerde instructies voor het oplossen van technische problemen en het vervangen van onderdelen.

Ford FE Engines - How to Rebuild: Complete Step-by-Step Instruction for 330- to 428-ci Engines

Ford FE-motoren, die vanaf eind jaren 1950 tot halverwege de jaren 1970 in productie waren, werden in het Ford programma aangeduid als de motoren met grote cilinderinhoud.
FE betekent Ford Edsel en dit weerspiegelt een tijdperk waarin Ford de naam Edsel wilde promoten. Het ontwerp van deze motoren werd aangepast om de cilinderinhoud te vergroten ten opzichte van hun voorgangers, de Y-blok motoren uit het vorige decennium.

Dit boek laat zien hoe je deze legendarische motoren kunt reviseren. CarTech's unieke Workbench serie formaat neemt u stap-voor-stap mee door het gehele revisieproces.
Aan bod komen de identificatie en selectie van de motor, demontage, reiniging, analyse en beoordeling van onderdelen, machinewerkplaatsprocessen, selectie van vervangingsonderdelen, heropbouw en opstart- plus inlooptechnieken.
In het boek worden ook handige tips gegeven over prestatieverbeteringen, probleempunten waar u op moet letten, speciaal gereedschap dat u nodig hebt en tips van professionele bouwers.

Klik hier voor meer informatie over de CarTech Workbench boeken

Auteur:Barry Rabotnick
Uitvoering:144 blz, 28 x 21.5 x 1 cm, softcover
Illustraties:388 kleurenfoto's
Uitgever:CarTech Inc (USA, 2016)
Serie:S-A Design Workbench (SA352)
EAN:9781613252444
Boek: Ford FE Engines - How to Rebuild: Complete Step-by-Step Instruction for 330- to 428-ci Engines

Ford FE Engines - How to Rebuild: Complete Step-by-Step Instruction for 330- to 428-ci Engines

Taal: Engels

Kopen bij bol.com
Kopen bij Amazon NL
Kopen bij Amazon BE

How to Build Max Performance Ford FE Engines

The Ford FE (Ford Edsel) engine is one of the most popular engines Ford ever produced, and it powered most Ford and Mercury cars and trucks from the late 1950s to the mid-1970s. For many of the later years, FE engines were used primarily in truck applications.

However, the FE engine is experiencing a renaissance; it is now popular in high-performance street, strip, muscle cars, and even high-performance trucks. While high-performance build-up principles and techniques are discussed for all engines, author Barry Rabotnick focuses on the max-performance build-up for the most popular engines: the 390 and 428.
With the high-performance revival for FE engines, a variety of builds are being performed from stock blocks with mild head and cam work to complete aftermarket engines with aluminum blocks, high-flow heads, and aggressive roller cams.

This book shows you how to select the ideal pistons, connecting rods, and crankshafts to achieve horsepower requirements for all applications. The chapter on blocks discusses the strengths and weaknesses of each particular block considered.
The book also examines head, valvetrain, and cam options that are best suited for individual performance goals. Also covered are the best-flowing heads, rocker-arm options, lifters, and pushrods. In addition, this volume covers port sizing, cam lift, and the best rocker-arm geometry.

Covers 332, 352, 361, 390, 406, 410, 427 and 428 cu in FE engines.

Klik hier voor meer informatie over de CarTech S-A Design boeken

Auteur:Barry Robotnick
Uitvoering:144 blz, 27.5 x 21.5 x 1 cm, softcover
Illustraties:400 kleurenfoto's
Uitgever:CarTech Inc (USA, 2010)
Serie:S-A Design (SA183)
EAN:9781934709153
Boek: How to Build Max Performance Ford FE Engines

How to Build Max Performance Ford FE Engines

Taal: Engels

Kopen bij bol.com
Kopen bij Amazon NL
Kopen bij Amazon BE

Ford V8 Engine Overhaul Manual (1961-1993) - Chilton Repair Manual

Chilton Repair Manual voor Amerikaanse Ford V8 benzinemotoren: 90° V Small Block, 335 Series Small Block, FE Series Big Block en 385 Series Big Block.

Behandelde typen:

Small Block: 255 (4.2 liter, 1979-1982), 260 (4.3 liter, 1962-1964), 289 (4.7 liter, 1963-1968), 302 (4.9 liter, vanaf 1968), 302 Boss (4.9 liter, 1969-1970), 351W (5.7 liter, vanaf 1969), 351C (5.7 liter, 1970-1974), 351 Boss (5.7 liter, 1970-1974), 351M (5.7 liter, 1975-1985) en 400 (6.5 liter, 1971-1981).

Big Block: 352 (5.7 liter, 1960-1966), 390 (6.4 liter, 1961-1971), 406 (6.6 liter, 1962-1963), 410 (6.7 liter, 1966-1967), 427 (7.0 liter, 1963-1968), 428 (7.0 liter, 1966-1970), 429 STD (7.0 liter, 1968-1973), 429 CJ (7.0 liter, 1969-1970), 429 SCJ (7.0 liter, 1969-1970), 429 Boss (S) (7.0 liter, 1969), 429 Boss (T) (7.0 liter, 1969-1970) en 460 (7.5 liter, vanaf 1969).

Dit Chilton werkplaatshandboek voor Noord-Amerikaanse Ford V8 benzinemotoren beschrijft onderhoud, herstelling en revisie van de complete motor (distributie, nokkenas, in- en uitlaatkleppen, cilinderkop, krukas, smeersysteem en pakkingen), koeling en het brandstofsysteem.

  • Stap-voor-stap instructies voor het uitnemen en terugplaatsen van de motor en de revisie van de cilinderkop en het motorblok.

    • Voor Amerikaanse en Canadese modellen.
    • Compleet met technische gegevens, afstelgegevens en aanhaalkoppels.

    Klik hier voor meer informatie over de Chilton Repair Manuals

    Uitvoering:272 blz, 27.5 x 20.5 x 2.2 cm, softcover
    Illustraties:rijk geïllustreerd met foto's en tekeningen
    Uitgever:Chilton Automotive Books (USA, 2001)
    Serie:Chilton Auto Repair Manual (8793)
    EAN:9780801987939
  • Boek: Ford V8 Engine Overhaul Manual (1961-1993) - Chilton Repair Manual

    Ford V8 Engine Overhaul Manual (1961-1993)

    Taal: Engels

    Kopen bij Amazon DE

    How to Rebuild Big-Block Ford Engines - FE and FT Series

    From racing to heavy-duty hauling, the big-block Ford engine has been used successfully in Ford Motor Co. vehicles ranging from full-size trucks and passenger cars to the LeMans-winning GT40. This book details how you can rebuild your FE or FT engine to perfect running condition using factory stock components.
    All rebuilding steps are covered with easy-to-understand text, illustrated with over 500 photos, charts, drawings and diagrams.

    You'll find tips on engine removal, disassembly, parts reconditioning, assembly and installation. You'll be able to do either a complete overhaul or a simple parts swap. As an added bonus, a complete section on parts identification and swapping is also included, along with the most complete and correct listing of specifications and casting numbers available on big-block Ford engines.
    Don't put off your project any longer. Rebuild your big-block Ford engine today!

    Covers all years and models of FE and FT engines used in Ford and Mercury passenger cars and Ford trucks:
    - 332, 352, 352 HP, 360, 361, 390, 390HP, 410, 427, 428, 428 CJ, 428 SCJ
    - 330 HD, 330 MD, 359, 361, 389, 391 cid.

    Auteur:Steve Christ
    Uitvoering:160 blz, 28 x 21.5 x 1 cm, softcover
    Illustraties:500+ foto's en tekeningen
    Uitgever:HP Books (USA, 1983)
    EAN:9780895860705
    Boek: How to Rebuild Big-Block Ford Engines - FE and FT Series

    How to Rebuild Big-Block Ford Engines - FE and FT Series

    Taal: Engels

    Kopen bij bol.com
    Kopen bij Amazon NL
    Kopen bij Amazon BE

    Ford 429 / 460 Engines - How to Rebuild (Revised Edition)

    Ford was unique in that it had two very different big-block engine designs during the height of the muscle car era. The original FE engine design was pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design. What began as a torquey engine meant to move heavyweight sedans morphed into screaming high-performance mill that won Le Mans and drag racing championships throughout the 1960s.

    By the late 1960s, the FE design was dated, so Ford replaced it with the 385 series in displacements of 429 and 460 cu in, which was similar to the canted-valve Cleveland design being pioneered at the same time.
    It didn't share the FE pedigree of racing success, mostly due to timing, but the new design was better in almost every way; it exists via Ford Motorsports' offerings to this day.

    Beginning in 1971, the 429 found its way between the fenders of Mustangs and Torinos in high-compression 4-barrel versions called the Cobra Jet and Super Cobra Jet, and it was one of the most powerful passenger car engines that Ford had ever built. If the muscle car era had not died out shortly after the release of these powerful engines, without a doubt, the 429 performance variants would be ranked with the legendary big-blocks of all time.

    In this revised edition of "How to Rebuild Big-Block Ford Engines", now titled "Ford 429/460 Engines: How to Rebuild", Ford expert Charles Morris covers all the procedures, processes, and techniques required to rebuild your powerplant.
    Step-by-step text provides details for determining whether your engine actually needs a rebuild, preparation and removal, disassembly, inspection, cleaning, machining and parts selection, reassembly, start-up, and tuning.

    Also included is a chapter on building the special Boss 429 engines, as well as a bonus chapter on the Ford 351 Cleveland, Ford's little brother to the big-block.
    If you are planning to rebuild a Ford 429 or 460 engine, are in the process of a rebuild, or just want to learn more about Ford's storied engines, this book is a must-have item for your shelf.

    Klik hier voor meer informatie over de CarTech Workbench boeken

    Auteur:Charles Morris
    Uitvoering:144 blz, 28 x 21.5 cm, softcover
    Illustraties:599 kleurenfoto's
    Uitgever:CarTech Inc (USA, 2019)
    Serie:S-A Design Workbench (SA162P)
    EAN:9781613254929
    Boek: Ford 429 / 460 Engines - How to Rebuild (Revised Edition)

    Ford 429 / 460 Engines - How to Rebuild (Revised Edition)

    Taal: Engels

    Kopen bij bol.com
    Kopen bij Amazon NL
    Kopen bij Amazon BE

    Ford Big-Block Parts Interchange - Covers all FE, MEL & 385 Series Engines

    The FE engine was a design pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design because cars were becoming bigger and heavier, and therefore, necessitated more power to move.
    What started as torquey engines meant to move heavyweight sedans morphed into screaming high-performance mills that won Le Mans and drag racing championships through the 1960s.

    By the late 1960s, the design was dated, so Ford replaced the FE design with the "385" series, also known as the "Lima" design, which was more similar to the canted-valve Cleveland design being pioneered at the same time.
    It didn't share the 1960s pedigree of racing success, but the new design was better in almost every way; it exists via Ford motorsports offerings to this day.

    In this book Ford expert and historian George Reid covers these engines completely. Interchange and availability for all engine components are covered including cranks, rods, pistons, camshafts, engine blocks, intake and exhaust manifolds, carburetors, distributors, and more.

    Expanding from the previous edition of High-Performance Ford Parts Interchange that covered both small- and big-block engines in one volume, this book cuts out the small-block information and devotes every page to the MEL, FE and 385 series big-blocks from Ford, which allows for more complete and extensive coverage.

    Klik hier voor meer informatie over de CarTech S-A Design boeken

    Auteur:George Reid
    Uitvoering:144 blz, 28 x 21.5 cm, softcover
    Illustraties:400 kleurenfoto's
    Uitgever:CarTech Inc (USA, 2018)
    Serie:S-A Design (SA397)
    EAN:9781613253441
    Boek: Ford Big-Block Parts Interchange - Covers all FE, MEL & 385 Series Engines

    Ford Big-Block Parts Interchange - Covers all FE, MEL & 385 Series Engines

    Taal: Engels

    Kopen bij bol.com
    Kopen bij Amazon NL
    Kopen bij Amazon BE

    Ford Big Block (Musclecar & Hi Po Engines)

    Brooklands Portfolio boek over de Ford 352, 385, 390, 406, 427, 428, 429 en 460 Big Block V8 motoren.

    De artikelen, destijds verschenen in het Amerikaanse tijdschrift 'Hot Rod Magazine', geven veel informatie over blueprinting, opvoeren, wijzigen van cilinderkoppen, revisie en restauratie.

    Klik hier voor meer informatie over de Brooklands Portfolio boeken

    Uitvoering:100 blz, 27 x 20.5 x 0.7 cm, softcover
    Illustraties:200 foto's en tekeningen
    Uitgever:Brooklands Books (GB, 1992)
    Serie:Musclecar & Hi Po
    EAN:9781855201064

    Andere boeken in deze categorie:

    How to Rebuild 4.6L & 5.4L Ford Engines

    How to Rebuild 4.6L & 5.4L Ford Engines

    George Reid

    Engels | softcover | 144 blz | 2015

    How to Build Max-Performance 4.6-Liter Ford Engines

    How to Build Max-Performance 4.6- & 5.4-Liter Ford Engines

    Sean Hyland

    Engels | softcover | 146 blz | 2004

    Ford Coyote Engines: How to Build Max Performance

    Ford 5.0L Coyote Engines (2011 to present): How to Build Max Performance

    Jim Smart

    Engels | softcover | 144 blz | 2017


    Niet alleen voor technische boeken over Fordkunt U bij de TMB Bookshop terecht. Klik hier om alle boeken over Ford te ontdekken (waaronder ook merkhistories, typenoverzichten, boeken over bepaalde modellen, tests, enz).

    Jaren: 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998


    Laatste update:07-07-2024