Chevrolet Pick-ups service and repair manual

1915-1920 Chevrolet Car & Truck Service Manual

Official factory workshop manual (reprint) for maintenance and repair of the 1915-1920 Chevrolet passenger cars and vans.

Models: 490.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: 1919.

1915-1924 Chevrolet Car & Truck Service Manual (2nd Edition)

Official factory workshop manual (reprint) for maintenance and repair of the 1915-1924 Chevrolet passenger cars, vans and light duty trucks.

Models:
- 490
- FB
- model T, model G
- Superior, Superior Truck.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: 1922.

1925-1926 Chevrolet Car, Pickup, & Truck Repair Manual - Superior Models

Official factory workshop manual (reprint) for maintenance and repair of the 1925-1926 Chevrolet Superior passenger cars and light duty trucks.

Models: Superior Series K and Superior Series V.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: DPRGM-186-26SM.

1927-1928 Chevrolet Car & Truck Repair Manual - Capitol and National - Series AA-AB

Official factory workshop manual (reprint) for maintenance and repair of the 1927-1928 Chevrolet passenger cars and light duty trucks.

Models:
- Series AA and AB
- Capitol, National
- Capitol Truck, National Truck.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: DPRGM-186-28SM.

How to Restore Your Chevrolet Pickup (1928 onwards)

This is a step-by-step restoration guide for all Chevy light-duty trucks from 1928 onwards. Also describes updates like upgrading to power steering, pressure oiling for "Stovebolt" six and electronic fuel injection upgrades, disc brakes and power brakes.

Features:
- disassembly and cleaning
- engine and electrics
- body and box
- chassis and paint
- body and trim.

1929-1930 Chevrolet Six Cylinder Car & Truck Repair Manual

Official factory workshop manual (reprint) for maintenance and repair of the 1929-1930 Chevrolet passenger cars and light duty trucks.

Models:
- International model, Series AC-LQ
- Universal model, Series AD-LR.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: DPRGM-49-30SM.

1929-1949 Chevrolet Master Parts Catalog - Six-Cylinder Models

Official parts catalog (reprint) for the 1929-1949 Chevrolet passenger cars and light duty trucks with 6-cylinder engines.

Models:
- International, International AC Series Truck
- Universal, Universal Truck
- AE Independence Truck
- Confederate, Confederate BB
- Eagle, Eagle CB
- Mercury, DB
- Master, Master Deluxe Truck
- Standard, Standard Truck
- Truck, Pickup, GC, GD, GE
- Master Truck, HC, HD, HE
- JA Master Deluxe, JC, JD
- Master 85, VA, KC, KD, KF, KP
- Special Deluxe, WA, AJ, AK, AL, AM, AN
- Fleetline, Fleetmaster, YR, BJ, BK, BL, BM, BN, BG, DJ, CK, DP, DR, DS, Fleetline Truck, Fleetmaster Truck
- Stylemaster Series, saloon Delivery, Styleline Deluxe, Styleline Special.

• High-quality reprint, licensed by General Motors.
• Contains drawings (exploded views) and lists with parts numbers.
• This is the same parts catalog that was used in the Chevrolet dealer's workshop at the time.
• Chevrolet reference: P&A 30 Revised.

1929-1958 Chevrolet Parts Catalog - Passenger Car, Corvette, Light and Medium Trucks

Official parts catalog (reprint) for the 1929-1958 Chevrolet passenger cars, light and medium trucks.

Models:
- International, International AC Series Truck
- Universal, Universal Truck, AE Independence Truck
- Confederate, Confederate BB
- Eagle, Eagle CB, Mercury, DB
- Master, Standard, Master Deluxe Truck, Standard Truck, Truck, Pickup, GC, GD, GE
- Master Truck, HC, HD, HE
- JA Master Deluxe, JC, JD
- Master 85, VA, KC, KD, KF, KP
- Special Deluxe, WA, AJ, AK, AL, AM, AN
- Fleetline, Fleetmaster, YR, BJ, BK, BL, BM, BN, BG, DJ, CK, DP, DR, DS, Fleetline Truck, Fleetmaster Truck
- Stylemaster Series, saloon Delivery
- Styleline Deluxe, Styleline Special
- Bel Air, Corvette, One-Fifty Series, Two-Ten Series
- 1500, Nomad, 3100
- Del Ray, Biscayne, Brookwood, Impala, Yeoman.

• High-quality reprint, licensed by General Motors.
• Contains drawings (exploded views) and lists with parts numbers.
• This is the same parts catalog that was used in the Chevrolet dealer's workshop at the time.
• Chevrolet reference: DPRGM-145-29PB.

1931 Chevrolet Six Cylinder Car & Truck Repair Manual - Independence Model, Series AE-LT

Official factory workshop manual (reprint) for maintenance and repair of the 1931 Chevrolet passenger cars and light duty trucks.

Models: Independence, Series AE-LT.

Covers the complete vehicle:
- engine (cylinder head, engine block, fuel system, ignition, lubrication, cooling, heater and exhaust)
- driveline (clutch and gearbox, propeller shaft, rear axle and differential)
- chassis (front axle, suspension, shock absorbers, steering system, brakes, servo unit, handbrake, wheel bearings and wheels)
- electrical system (battery, starter motor, dynamo, voltage regulator, headlamps, tail lights, turn signals, instrument panel, windshield wipers)
- body (welded components, bumpers, hood, fenders, doors, tailgate, fixed windows, window lift mechanisms, seats, interior trim, interior lamps).

• Clear, very detailed instructions with drawings, photos and specifications.
• High-quality reprint, licensed by General Motors.
• This is the same technical manual as was used in the Chevrolet dealer's workshop at the time. Chevrolet reference: DPRGM-49-31SM.

Chevrolet & GMC Light Truck Owner's Bible (1939-1995)

This book relates the history of Chevrolet's engineering and technology advancements in the pickup and provides buyer's guide tips for both new and used trucks.
In-depth preventive maintenance and tuning information covers General Motors engines from the classic Stovebolt and Jimmy sixes through the modern TBI V-8s. There's also a special section that explains how to build a 383 "stroker" small-block V-8 for maximum trailer pulling and off-road power.

These engine modification steps are supported with procedures for upgrading the popular 700R-4 automatic overdrive transmission and manual transmission gear assemblies. Suspension modifications and lift kits are also covered.
If you own a Chevrolet or GMC Light Truck, look no further-this is the essential book for maintaining, modifying and enjoying your truck.

Chevy and GMC Light Truck models covered (1939-1995):
- Blazer
- C/K to one ton capacity
- Carryall
- Full-Size to one ton capacity
- Jimmy
- Sierra C/K to 3500 Series
- Suburban
- Tahoe
- Yukon.

Click here to know more about the Bentley Service Manuals

How to Restore Your Chevy Truck (1947-1955)

The Advance Design era (1947-1955) was historic for Chevrolet, topping all the production numbers every year they were in production. And for good reason. The post-World War II economy demanded a tough and well-engineered solution for this growing economy.
Selling more than 2.5 million units during this era, Chevrolet quickly surpassed and controlled the light-truck market with style, utility, and logical engineering. This era has been overlooked for long enough, and Deve Krehbiel, a well-known restoration expert from DevesTechNet.com who specializes in these trucks, puts his 40 years of experience restoring nothing but Advance Design trucks into an extensive and complete single volume. Everything you need to completely restore your 1947-1955 first series Chevy pickup to better-than-new condition is shown in complete detail.

With more than 500 photos and detailed instructions for every aspect of a proper restoration, this book will be the restorer's best friend. Deve's companion book, "Chevrolet Inline 6 Engine (1929-1962)", explains in full detail the engine aspects of your project.

The Advance Design Chevy pickup is one of the most popular and highly prized vehicles at any venue. The author's hope is that this book will give you the confidence and the knowledge to put your old Chevy truck back on the road in style. There is just nothing more interesting and more inviting than an old Chevy truck!

Click here to know more about the CarTech Workbench books

Chevrolet Trucks 1955-1959: How to Build & Modify

Many vintage trucks can still be found in their original condition. Unlike years ago, the automotive aftermarket has now realized the popularity of these trucks. Whether you plan to restore one as a mild custom or go all out, the necessary parts are available, which makes it easier to achieve your dream regardless of your skills or budget.
Veteran how-to book author Dennis W. Parks resurrects a 1955 Chevy pickup as the subject of "Chevrolet Trucks: 1955-1959 Build & Modify" to be used as a daily driver. Starting with a classic-styled work truck, he updates it with creature comforts that are found in new vehicles - those that the average hot rodder can still maintain without having an electronics degree.

Everything is covered, including updating the front and rear suspension as well as installing disc brakes to provide a good foundation for your project. Body repair and modifications (including installing patch panels, power windows, rotary door latches, and a stylish third brake light) are next. Interior components (including the latest creature comforts) that provide safety and convenience are examined. Mechanical components (such as the engine, transmission, steering, cooling, and wiring) are included as well.

Everything you need to know to build a safe and reliable pickup truck is included in this book. Most of the work featured is performed in a home garage, which proves that you can build a decent truck within the confines of a two-car garage without paying a fortune in labor.

Click here to know more about the CarTech S-A Design books

The Classic Chevy Truck Handbook - How to Rod, Rebuild, Restore, Repair and Upgrade Classic Chevy Trucks 1955-1960

This essential guide for owners of Chevy trucks built from 1955 through 1960 provides step-by-step instruction on frame and chassis cleaning, suspension rebuilding and upgrades, rebuilding steering, upgrading brakes to front discs, rebuilding the engine, cooling system upgrades, transmission choices, electrical rewiring, and much more.

How to Restore Your Chevy Truck (1967-1972) - Step by Step Restoration Procedures

When Chevy released its second-generation C/K pickup trucks, dubbed the "Action Line," it was apparent that many changes over the previous generation had been employed. Not only did the truck have a simpler, more clean-cut look but this was also the beginning of an era where modern creature comforts that we often take for granted started appearing in the good old Chevy workhorse.
Power steering, power brakes, more-powerful engines, a smoother-riding coil rear suspension, automatic transmissions, and independent front suspension all led to what was the most drivable of any Chevy trucks to this point. Back then and today, this generation of Chevy truck is almost universally considered the most popular. Aftermarket parts availability and auction prices support that assertion.

In "How to Restore Your Chevy Truck: 1967-1972", veteran author Kevin Whipps shows you how to inspect, assess, and accurately budget your restoration project. You are then taken through each major portion of truck restoration, including the engine, suspension, chassis, bodywork, paint, brakes, steering, transmission, driveline, electrical system, interior, and more.
Each section shows practical, real-world repair and restoration in general and step-by-step formats. After all of these years of hard use and exposure to harsh conditions, most of these trucks are in need of some serious work.

Chevy/GMC trucks are extremely popular as stock restorations, fast street trucks, and off-road trucks. But before you can build a specialty truck, you need to have a solid, reliable, restored truck. This book provides the invaluable information and step-by-step instruction to return these trucks to their original glory.

How to Restore Your Chevy Truck (1973-1987) - Step-by-Step Restoration Procedures

When Chevy released its third-generation C/K pickup trucks, the stout and sturdy performers captured the attention of Chevy and GMC truck enthusiasts. As a result, millions were sold during their 18-year production run. The new cab design featured rounded windshield corners, a rounded cab roof, and sloped and rounded doors. Although the older Chevy/GMC pickups are more exclusive, the third-generation pickups are plentiful, increasing in collector value, and, fortunately, they have parts that are readily available.

Chevy/GMC trucks are extremely popular as stock restorations, fast street trucks, and off-road-duty trucks. But before you can build a specialty truck, you need to have a solid, reliable, restored truck. Whether your 1973-1987 Chevy truck is a regular, super, or crew cab with a short or long box, this restoration guide provides the pertinent information and instruction to restore your squarebody truck to original condition.

Seasoned truck magazine writer Kevin Whipps explains real-world techniques for restoring classic Chevrolet and GMC trucks at home. In "How to Restore Your Chevy Truck: 1973-1987", you are shown how to comprehensively inspect, properly assess, and accurately budget your restoration project.
You are also guided through each major portion of truck restoration, including the engine, suspension, chassis, bodywork, paint, brakes, steering, transmission, driveline, electrical system, interior, and more.
Special coverage is dedicated to the replacement of body panels and repair of the box, cab, and other body parts. When pro-caliber bodywork has been performed, you have an excellent foundation for the paint, and in turn, you're shown how to prep, shoot, and buff the paint job.

Chevy / GMC Trucks (1973-1987) - How to Build and Modify

GM's squarebody trucks are a solid, simple, and easy-to-find rig - and that makes them perfect for modification. They're American classics, and they've become the hot rods of a new generation.
Veteran magazine editor Jim Pickering brings these trucks into focus, taking you through the aspects that make them so popular and modifications you can perform to put a modern spin on their classic looks.
He takes an in-depth look at all the major systems in your Chevy truck and covers what can be done to them to turn your classic hauler into the modern hot rod that you want: a truck that's fast, safe, full of curb appeal, and reliable enough to drive whenever and wherever you want.

Built in massive numbers during an 18-year production run, these trucks aren't hard to source, but finding a good starting point and mapping out your plan are important.
This book covers a lot of territory: how to find a good starter truck, LS-power builds and installs, slammed air suspension and coilover systems, automatic and manual transmission choices (including a 6-speed manual conversion), cooling system upgrades, safely adding a modern alternator to factory GM wiring, modifying a mechanical clutch pedal to use a hydraulic master and slave cylinder, making new fuel lines and brake lines to support fuel injection and big brakes, installing a 4-link rear suspension system, fabricating an under-bed mount to hide air suspension components, building exhaust, adding LED lighting, interior restoration, and more.

If you're building a squarebody truck that you'd actually like to drive regularly, you've come to the right place. There hasn't ever been a more comprehensive, authoritative look at building a complete truck for street use that includes all the steps required to make it work.

Click here to know more about the CarTech Workbench books