I&T Shop Manuals on agricultural tractors
The American I&T Shop Manuals on farm tractors have been published since 1948. Older issues are regularly reprinted. In this way manuals on historic Allis-Chalmers, Case, David Brown, Farmall, Ferguson, Ford, Fordson, International, John Deere, Massey-Ferguson and Oliver farm tractors are still available.
- The I&T Shop Manuals are intended for experienced mechanics. Although written for the American market, these books give also useful information for many tractor types sold in the rest of the world (especially types from the 40s, 50s, 60s, 70s and 80s).
- The detailed text is supplemented with photos, drawings and exploded views. These books also contain tables with technical data, adjustment data, tolerances and torque wrench settings.
- In some I&T Shop Manuals, three to five previously published manuals (usually of historic tractors) are bundled together into one volume.
Publisher: Clymer (USA)
Size: 27.5 x 20.5 cm (10.8 x 8 in), paperback
Language: These books are only available in English.
Units: These manuals list measures and weights in ISO units (m, kg, Nm, ...) as well as in Imperial units (inch, ft, lb ft, ...).
Wiring diagrams: Some manuals contain wiring diagrams, but not all.
The detailed text is supplemented with photos, drawings and exploded views.
Contents : These workshop manuals describe extensively maintenance, repair and overhaul of the engine, clutch, gearbox, differential, power take-off (PTO), rear axle, front axle, steering system, cooling, electrical system and hydraulic lifting system. Included are adjustment data and torque wrench settings.
A typical I&T Shop Manual (in this case for an older tractor type) features following chapters:
Index
Condensed service data
Front system and steering
Front axle assembly and steering linkage
Manual steering gear
Power steering system
Fluid and bleeding
Hydraulic pump
Power cylinder and control valve
Engines and components
Removing and reinstalling engine with clutch
Engine compression pressures
Removing and reinstalling cylinder head
Valves and seats
Valve guides and springs
Adjustment
Exhaust valve rotators
Valve tappets (cam followers)
Rocker arms
Removing and reinstalling timing gear cover
Camshaft and bearings
Connecting rod and piston units
Piston rings
Pistons and cylinders
Piston pins
Connecting rods and bearings
Crankshaft and main bearings
Crankshaft oil seals
Flywheel
Oil pan (sump)
Oil pump and relief valve
Gasoline fuel system
Filters and screens
Fuel pump
Carburetor
Diesel fuel system
Troubleshooting
Filters and bleeding
Injection nozzles
Fuel injection pump
Injection pump drive gear
Diesel governor adjustments
Throttle linkage adjustments
Thermostart cold weather starting aid
Fuel lift pump
Cooling system
Radiator pressure cap and thermostat
Radiator
Water pump
Electrical system
Generator and regulator
Starting motor
Ignition system
Clutch
Tractor split
Linkage adjustment
Removing and reinstalling and overhaul
Auxiliary transmission
Removing and reinstall
Overhaul
Transmission (mechanic)
Lubrication
Removing and reinstall
Overhaul
Transmission (planetary)
Transmission operation
Hydraulic system
Lubrication and filters
System adjustments
Trouble shooting
Overhaul transmission
Differential , bevel gears and rear axle
Split tractor between transmission and rear axle center housing
Differential and gears
Rear axle shafts, bearings and seals
Brakes
Adjustment
Removing and reinstalling brake shoes
Removing and reinstalling discs and actuating assembly
Brake shaft and seals
Transmission hand brake
Power take-off (PTO)
Operating principles
Trouble shooting
Overhaul
Belt pulley
Overhaul belt pulley assembly
Hydraulic lift system
Hydraulic fluid
Hydraulic filters
Trouble shooting
Hydraulic pressure check
Adjustments
Lift cover and cylinder assembly
Control valves
Overhaul control linkage and lift shaft
Flow control valve and operating linkage
Hydraulic pump