Ford automatic transmissions - overhaul: books

Ford-Mercury-Getriebe - Ford-O-Matic und Merc-O-Matic - Bucheli Reparaturanleitung

Bucheli Reparaturanleitung for service and repair of the Ford-O-Matic and Merc-O-Matic automatic transmissions from the 1950s and 60s.

This Bucheli repair manual on the Ford-O-Matic and Merc-O-Matic automatic transmissions covers in detail maintenance and repair.

• Dozens of clear illustrations and technical drawings.
• Includes comprehensive technical data and torque wrench settings.

Click here to know more about the Bucheli repair manuals

Ford Automatic Transmission Overhaul Manual (1964-1996) - Fundamentals, diagnosis, overhaul, modifications - Haynes TechBook

Haynes TechBook covering the overhaul of Ford automatic transmissions and transaxles, installed in Ford, Lincoln and Mercury passenger cars, vans and pick-ups.

Covers the following models:
- In-line transmissions for rear wheel drive: Ford C3 (1974-1986), C4 (1964-1982), C5 (1981-1986), C6 (1966-1996) and AOD (1980-1994).
- Transaxles for front wheel drive: Ford ATX / FLC (1984-1994) and AXOD (1986-1990).

Exclusions: Please note that this manual does not cover the electronic versions of the AOD (type AODE) or AXOD (type AXODE).

• Over 1000 photos and complete step-by-step instructions for the overhaul of the complete transmission (torque converter, planetary gears, brake bands, oil pump and switch block).
• Also chapters about working principles, identification, tools, measuring instruments, removal and assembly.

How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions

The Ford C4 and C6 automatic transmissions have equipped millions of production rear-wheel drive cars and trucks since they were introduced in the 1960s (C4 in 1964, C6 in 1966). They remained in production deep into the 1980s, when overdrive-equipped transmissions finally eclipsed them. However, the C4 and C6 remain incredibly popular with enthusiasts, racers, and restorers alike due to their simplicity, strength, and low cost.

Rebuilding either of these transmissions isn't overly difficult, but does require care, some specialized tools, and proper procedure to be followed closely.

In "How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions", author George Reid walks readers through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing.
In addition, if the transmission will be used in a high-performance or competition situation, the author includes the various steps required to bolster the unit's strength, using commonly available aftermarket components.

Each chapter contains special notes, sidebars, and technical tips to assist the reader at every step in the process. Some refer to safety, others to time-saving advice, and others to small modifications that may aid long-term durability or help the builder tailor the shift firmness.
The author's extensive research and experience with these popular transmissions has resulted in a well-rounded full-color technical guide to their revitalization.

Click here to know more about the CarTech Workbench books

Ford AOD Transmissions - Rebuilding and Modifying the AOD, AODE and 4R70W

While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars.

Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards.
A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy.

In "Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W", author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing.
Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection.

Click here to know more about the CarTech Workbench books