Transmissions automatiques Ford - révision : livres

Ford-Mercury-Getriebe - Ford-O-Matic und Merc-O-Matic - Bucheli Reparaturanleitung

Manuel Bucheli pour l'entretien et la réparation des transmissions automatiques Ford-O-Matic et Merc-O-Matic des années 50 et 60.

Ce manuel Bucheli pour les transmissions automatiques Ford-O-Matic et Merc-O-Matic couvre en détail l'entretien et la réparation.

• Complet avec les données techniques et les couples de serrage.

Cliquez ici pour plus d'information sur les manuels "Bucheli Reparaturanleitung"

Ford Automatic Transmission Overhaul Manual (1964-1996) - Fundamentals, diagnosis, overhaul, modifications - Haynes TechBook

Manuel américain Haynes Techbook consacré à la révision des transmissions et transaxles automatiques, installées dans des voitures, des camionnettes et des pick-ups des marques Ford, Lincoln et Mercury. Couvre les modèles suivants :
- Transmissions en ligne pour propulsion arrière : Ford C3 (1974-1986), C4 (1964-1982), C5 (1981-1986), C6 (1966-1996) et AOD (1980-1994).
- Transaxles pour traction avant : Ford ATX / FLC (1984-1994) et AXOD (1986-1990).

Ne traite pas des versions électroniques des transmissions AOD (type AODE) et AXOD (type AXODE).

• Plus de 1000 photos et des instructions pas à pas pour la révision de la transmission complète (convertisseur de couple, réducteurs planétairs, segments de frein, pompe à huile et bloc de commande).
• Aussi chapitres sur les principes de fonctionnement, la réparation, l'identification, les outils, les instruments de mesure, dépose et repose.

How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions

The Ford C4 and C6 automatic transmissions have equipped millions of production rear-wheel drive cars and trucks since they were introduced in the 1960s (C4 in 1964, C6 in 1966). They remained in production deep into the 1980s, when overdrive-equipped transmissions finally eclipsed them. However, the C4 and C6 remain incredibly popular with enthusiasts, racers, and restorers alike due to their simplicity, strength, and low cost.

Rebuilding either of these transmissions isn't overly difficult, but does require care, some specialized tools, and proper procedure to be followed closely.

In "How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions", author George Reid walks readers through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing.
In addition, if the transmission will be used in a high-performance or competition situation, the author includes the various steps required to bolster the unit's strength, using commonly available aftermarket components.

Each chapter contains special notes, sidebars, and technical tips to assist the reader at every step in the process. Some refer to safety, others to time-saving advice, and others to small modifications that may aid long-term durability or help the builder tailor the shift firmness.
The author's extensive research and experience with these popular transmissions has resulted in a well-rounded full-color technical guide to their revitalization.

Cliquez ici pour plus d'information sur les livres CarTech Workbench

Ford AOD Transmissions - Rebuilding and Modifying the AOD, AODE and 4R70W

While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars.

Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards.
A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy.

In "Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W", author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing.
Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection.

Cliquez ici pour plus d'information sur les livres CarTech Workbench