Petrol Injection Systems: Service & Repair Manuals

Haynes Engine Management Manual: Petrol and diesel systems (Cars and light commercial vehicles)

The definitive DIY manual on modern petrol and diesel engine management systems. Includes detailed descriptions, fault finding procedures and step-by-step test routines using simple equipment, applicable to all systems. Also contains detailed coverage of the most popular UK models.

Product details

How to Tune and Modify Automotive Engine Management Systems

Understanding fuel injection and engine management systems is the key to extracting higher performance from today's automobiles in a safe, reliable, and driveable fashion. Turbochargers, superchargers, nitrous oxide, high compression ratios, radical camshafts: all are known to make horsepower, but without proper understanding and control of fuel injection and other electronic engine management systems, these popular power-adders will never live up to their potential and, at worst, can cause expensive engine damage.
Drawing on a wealth of knowledge and experience and a background of more than 1,000 magazine articles on the subject, engine-control expert Jeff Hartman explains everything from the basics of fuel injection to the building of complex project cars. Hartman covers the latest developments in fuel-injection and engine management technology applied by both foreign and domestic manufacturers, including popular aftermarket systems.

Contents: upgrade your engine to increase horsepower - understand computer-assisted engine control - evaluate and troubleshoot OEM and aftermarket systems - tune your car for maximum performance.

Product details

Performance Fuel Injection Systems - How to Design, Build, Modify, and Tune EFI and ECU Systems

A practical guide to modifying and tuning modern electronic fuel injection (EFI) systems, including engine control units (ECUs). The book starts out with plenty of foundational topics on wiring, fuel systems, sensors, different types of ignition systems, and other topics to help ensure the reader understands how EFI Systems work.
Next the book builds on that foundation, helping the reader to understand the different options available: Re-tuning factory ECUs, add on piggyback computers, or all out standalone engine management systems.
Next Matt and Jerry help the reader to understand how to configure a Standalone EMS, get the engine started, prep for tuning, and tune the engine for maximum power and drivability.

Also covered is advice on tuning other functions - acceleration enrichments, closed loop fuel correction, and more. Finally, the book ends with a number of case studies highlighting different vehicles and the EMS solutions that were chosen for each, helping to bring it all together with a heavy emphasis on how you can practically approach your projects and make them successful!

Product details

Designing And Tuning High-Performance Fuel Injection Systems

The sport compact performance market is hot and getting hotter - and while the Honda Civic and Acura Integra have long been the dominant players in the market, a newcomer is emerging as a popular car for performance modifications - the Ford Focus. Well-built, inexpensive, good looking, and easy to modify, the Focus is quickly catching the Hondas in terms of market popularity.

This book shows Focus owners exactly what it takes to improve their car's performance, from simple modifications like installing a new air intake to radical mods like installing a turbocharger.
The author also shows what those modifications can do, with before-and-after dyno tests for each modification. There's also extensive info on suspension and brake modifications for better handling and braking. It's a one-stop shop for those who want a sharper, faster Focus.

More information about CarTech S-A Design books

Product details

Engine Management: Advanced Tuning

This book explains how the EFI system determines engine operation and how the calibrator can change the controlling parameters to optimize actual engine performance. It takes engine-tuning techniques to the next level. It is a must-have for tuners and calibrators and a valuable resource for anyone who wants to make horsepower with a fuel-injected, electronically controlled engine.

The book contains detailed equations, graphs, and illustrations. Also included are valuable and practical examples, including real-world examples based upon the author's experience that will help more advanced readers apply this new information to situations that are commonly seen during calibration.
Author Greg Banish is a calibration engineer with extensive aftermarket performance calibration experience. With over a thousand unique calibrations performed over five years, he has worked with enthusiasts and OEMs alike to improve the performance and driving behavior of a wide range of vehicles.

More information about CarTech S-A Design books

Product details

High Performance Ford Focus Builder's Handbook

Discover how to unlock the full potential of your Ford Focus. This illustrated guide covers performance upgrades for Focus owners, from simple air intake improvements to advanced modifications like turbochargers.

Includes:
- Step-by-step instructions for common and advanced upgrades
- Before-and-after dyno results for each modification
- Detailed advice on suspension and brake improvements

A complete reference for enhancing speed, handling, and responsiveness. Perfect for enthusiasts seeking a faster, sharper Focus.

More information about CarTech S-A Design books

Product details

Fuel Injection Manual (1986-1999) | Haynes TechBook

American Haynes TechBook on fuel injection systems (port systems, TBI, CIS, CIS-E and Bosch Motronic). Covers American car models from BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes-Benz, Nissan, Subaru, Toyota, VW and Volvo.

Years of manufacture: 1986-1999.

Chapters on operating principles, troubleshooting using the on-board computer and simple tools, step-by-step checks, testing fuel pressure and replacing components.

Contents:
1) Introduction
2) Fuel Injection Tools
3) Part A - Basic Troubleshooting
3) Part B - Computer Error Codes
4) Fuel System Pressure Relief
5) Fuel Filters, Lines, and Fittings
6) Parts Inspection and Replacement

Product details

How to Understand, Service and Modify Bosch Fuel Injection & Engine Management

This is the authoritative handbook on Bosch Fuel Injection and Engine Management Systems. This is the only manual that fully explains aspects of the most widely installed Bosch systems, including specific technical information on the newest KE-Motronic and LH-Motronic systems that is not available from any other source.
Bosch Systems covered: Motronic, LH-Motronic, L-Jetronic, LH-Jetronic, KE-Jetronic, KE-Motronic, K-Jetronic and D-Jetronic.

Author Charles Probst has worked directly with factory engineers and technicians from Bosch, Porsche, BMW, Mercedes-Benz, Volkswagen, Audi, and other manufacturers to produce down-to-earth but detailed technical literature for real-world technicians. Now complete service and maintenance procedures, with Charles's expert advice and troubleshooting tips, are available to you.

Charles clarifies advantages and operating principles of each Bosch system and explains how they work. He also gives you high performance tuning secrets that really work for street and racing applications, and tells you why some tricks, like "fooling" the computer, don't.
With over 350 illustrations and photos, this 224-page book is a must-have reference for do-it-yourself mechanics, performance enthusiasts, and professional technicians who want to understand Bosch systems.

Product details

Systèmes d'injection électronique et antipollution

The "Mécanique automobile: diagnostic et réparation" series is a collection of books in French covering the theory, inspection of systems and components, fault diagnosis, and repair techniques for cars and light trucks.

This volume focuses on electronic fuel injection and emission control systems.

Table of Contents:
1. Fuel supply systems
2. Electronic fuel injection
3. Inspection and maintenance of injection systems
4. Sensors and diagnostic methods
5. Intake and exhaust systems
6. Emission control systems
7. Maintenance and repair of emission control systems

Pages of the book "Systèmes d'injection électronique et antipollution"

Product details

Grundlagen Motorentechnik und Motorsteuerung (Automobilelektronik lernen)

The complex technology of today's motor vehicles with their increasing proportion of vehicle electronics requires an ever-increasing pool of information in order to understand how components and systems work.

In this German textbook "Grundlagen Motorentechnik and Motorsteuerung", learning automotive electronics provides the basics required for understanding, explains the function and shows the application of current vehicle electronics.
It offers quick and secure access to this information and explains it clearly, systematically and in an application-oriented manner.

Product details

Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen

This practical manual explains the structure and function of electronic petrol injection systems in understandable terms, but without neglecting professional know-how. All components of the electronic injection system and how they interact are explained.

Pages of the book "Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen"

Product details