DEENESFRNLPL

< Relación >

Sistemas de inyección y gestión del motor: libros - técnica automotriz

Instrucciones prácticas para el diagnóstico de problemas técnicos y sustitución de piezas. Información completa para el profesional y el aficionado competente.

Systèmes d'injection électronique et antipollution - Mécanique automobile : diagnostic et réparation

de (Autor)

La série "Mécanique automobile : diagnostic et réparation" est une collection de livres sur la théorie, la vérification des systèmes, sous-systèmes et composants, du diagnostic de défaillances et les techniques de réparation pour les automobiles et camions légers en langue française.

Ce tome traite des systèmes d'injection électronique et antipollution.

Páginas del libro Systèmes d'injection électronique et antipollution - Mécanique automobile : diagnostic et réparation (1)

Table de matières :

1 - Systèmes d'alimentation en carburant
2 - Injection électronique
3 - Vérification et entretien de systèmes d'injection
4 - Capteurs et méthodes de diagnostic
5 - Systèmes d'admission et d'échappement
6 - Systèmes antipollution
7 - Entretien et réparation des systèmes antipollution.

Presentación:232 páginas, 28 x 21.5 x 1.5 cm, tapa blanda
Ilustración:abundantemente ilustrado con fotos y dibujos y color
Editor:Éditions Reynald Goulet (CDN, 2015)
Serie:Diagnostic et réparation
EAN:9782893774640
Livre: Systèmes d'injection électronique et antipollution - Mécanique automobile : diagnostic et réparation

Systèmes d'injection électronique et antipollution - Mécanique automobile : diagnostic et réparation

Idioma: Francés

Comprar en Amazon.com Comprar en Amazon ES

Haynes Engine Management Manual: Petrol and diesel systems (Cars and light commercial vehicles)

de (Autor)

Manuel technique de Haynes consacré aux systèmes de gestion des moteurs modernes, essence et diesel. Descriptions détaillées des systèmes européens les plus courants, diagnostic des défauts, remplacement des composants.

  • Traite détaillé des systèmes de gestion moteur des voitures BMW série 3 (E46) / Citroën Saxo et Xsara / Fiat Punto / Ford Fiësta, Focus, Galaxy, Ka et Mondeo / Land Rover Freelander / Opel Corsa, Astra, Vectra et Zafira / Peugeot 206, 307 et 406 / Renault Clio, Mégane et Scénic / Rover 25 et MG ZR / VW Bora, Golf et Polo.
  • Ce livre contient des instructions pas à pas, illustré avec plus de 400 photos.
Presentación:256 páginas, 27 x 21 x 2 cm, tapa blanda
Ilustración:400 fotos b/n y 20 a color
Editor:Haynes Publishing (GB, 2014)
Serie:Haynes Manual (4199)
EAN:9780857337467
Livre: Haynes Engine Management Manual: Petrol and diesel systems (Cars and light commercial vehicles)

Haynes Engine Management Manual: Petrol and diesel systems (Cars and light commercial vehicles)

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Engine Management: Optimising carburettors, fuel injection and ignition systems

de (Autor)

Modern engines rely on engine management systems to provide flexible power, whilst also meeting exhaust emissions regulations.
This extensively illustrated book unravels the 'black art' of engine management and the software included allows the reader to simulate the effects of changing system parameters using a 'virtual' engine. It will appeal both to readers interested in tuning modern engines and to those who simply wish to gain a deeper understanding.

Presentación:176 páginas, 27.5 x 21.5 x 1.3 cm, tapa dura
Ilustración:176 fotos a color
Editor:Haynes Publishing (GB, 2001)
EAN:9781859608357
Livre: Engine Management: Optimising carburettors, fuel injection and ignition systems

Engine Management: Optimising carburettors, fuel injection and ignition systems

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Fuel Injection Manual (1986-1999) - Haynes TechBook

Livre américain Haynes Techbook consacré aux systèmes d'injection d'essence (port systems, TBI, CIS, CIS-E et Bosch Motronic). Traite des versions américaines des marques BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes-Benz, Nissan, Subaru, Toyota, VW et Volvo.

Années : 1986-1999.

Sommaire :
1) Introduction
2) Outils d'injection de carburant
3) Partie A - Résolution de problèmes de base
3) Partie B - Codes d'erreur de l'ordinateur
4) Décharge de pression du système de carburant
5) Filtres à carburant, tuyaux et raccords
6) Contrôle et remplacement des pièces

Presentación:384 páginas, 27.5 x 20.5 x 2 cm, tapa blanda
Ilustración:ricamente ilustrado
Editor:Haynes Manuals, Inc. (USA, 2001)
Serie:Haynes TechBook (10220)
EAN:9781563923869
Livre: Fuel Injection Manual (1986-1999) - Haynes TechBook

Fuel Injection Manual (1986-1999) - Haynes TechBook

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

How to Tune and Modify Automotive Engine Management Systems

de (Autor)

Understanding fuel injection and engine management systems is the key to extracting higher performance from today's automobiles in a safe, reliable, and driveable fashion. Turbochargers, superchargers, nitrous oxide, high compression ratios, radical camshafts: all are known to make horsepower, but without proper understanding and control of fuel injection and other electronic engine management systems, these popular power-adders will never live up to their potential and, at worst, can cause expensive engine damage.
Drawing on a wealth of knowledge and experience and a background of more than 1,000 magazine articles on the subject, engine-control expert Jeff Hartman explains everything from the basics of fuel injection to the building of complex project cars. Hartman covers the latest developments in fuel-injection and engine management technology applied by both foreign and domestic manufacturers, including popular aftermarket systems.

Contents: upgrade your engine to increase horsepower - understand computer-assisted engine control - evaluate and troubleshoot OEM and aftermarket systems - tune your car for maximum performance.

Presentación:336 páginas, 27 x 21.5 x 2.2 cm, tapa blanda
Ilustración:5 fotos b/n y 259 a color
Editor:Motorbooks International (USA, 2013)
EAN:9780760343456
Livre: How to Tune and Modify Automotive Engine Management Systems

How to Tune and Modify Automotive Engine Management Systems

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Grundlagen Motorentechnik und Motorsteuerung (Automobilelektronik lernen)

de (Autor)

Die komplexe Technik heutiger Kraftfahrzeuge mit ihrem steigenden Anteil an Fahrzeugelektronik macht einen immer größer werdenden Fundus an Informationen notwendig, um die Arbeitsweise von Komponenten und Systemen zu verstehen.

Fundiert stellt Automobilelektronik lernen in diesem Lehrheft "Grundlagen Motorentechnik und Motorsteuerung" die zum Verständnis erforderlichen Grundlagen bereit, erläutert die Funktion und zeigt die Anwendung aktueller Fahrzeugelektronik.
Es bietet den raschen und sicheren Zugriff auf diese Informationen und erklärt sie anschaulich, systematisch und anwendungsorientiert.

Presentación:80 páginas, 24 x 16.5 x 0.5 cm, tapa blanda
Ilustración:25 fotos y dibujos y color
Editor:Springer Vieweg (D, 2012)
EAN:9783658000752
Livre: Grundlagen Motorentechnik und Motorsteuerung (Automobilelektronik lernen)

Grundlagen Motorentechnik und Motorsteuerung (Automobilelektronik lernen)

Idioma: Alemán

Comprar en Amazon.com Comprar en Amazon ES

Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen

de (Autor)

Dieses Praxishandbuch stellt in verständlichen Worten, aber ohne dass professionelles Know-how zu kurz kommt, Aufbau und Funktionsweise von elektronischen Benzin-Einspritzanlagen dar. Alle Bauteile der elektronischen Einspritzanlage und deren Zusammenspiel werden erklärt.

Páginas del libro Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen (1)

Presentación:96 páginas, 30.5 x 21.5 x 1.5 cm, tapa dura
Ilustración:abundantemente ilustrado con fotos y dibujos
Editor:Heel-Verlag GmbH (D, 2012)
EAN:9783868524888
Livre: Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen

Praxishandbuch Benzin-Einspritzanlagen - Aufbau und Funktion von Single- und Multipoint-Systemen

Idioma: Alemán

Comprar en Amazon.com Comprar en Amazon ES

Performance Fuel Injection Systems - How to Design, Build, Modify, and Tune EFI and ECU Systems

de (Autor)

A practical guide to modifying and tuning modern electronic fuel injection (EFI) systems, including engine control units (ECUs). The book starts out with plenty of foundational topics on wiring, fuel systems, sensors, different types of ignition systems, and other topics to help ensure the reader understands how EFI Systems work.
Next the book builds on that foundation, helping the reader to understand the different options available: Re-tuning factory ECUs, add on piggyback computers, or all out standalone engine management systems.
Next Matt and Jerry help the reader to understand how to configure a Standalone EMS, get the engine started, prep for tuning, and tune the engine for maximum power and drivability.

Also covered is advice on tuning other functions - acceleration enrichments, closed loop fuel correction, and more. Finally, the book ends with a number of case studies highlighting different vehicles and the EMS solutions that were chosen for each, helping to bring it all together with a heavy emphasis on how you can practically approach your projects and make them successful!

Presentación:160 páginas, 27.5 x 21.5 x 1.1 cm, tapa blanda
Ilustración:fotos y dibujos
Editor:HP Books (USA, 2010)
EAN:9781557885579
Livre: Performance Fuel Injection Systems - How to Design, Build, Modify, and Tune EFI and ECU Systems

Performance Fuel Injection Systems - How to Design, Build, Modify, and Tune EFI and ECU Systems

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Designing And Tuning High-Performance Fuel Injection Systems

de (Autor)

The sport compact performance market is hot and getting hotter - and while the Honda Civic and Acura Integra have long been the dominant players in the market, a newcomer is emerging as a popular car for performance modifications - the Ford Focus. Well-built, inexpensive, good looking, and easy to modify, the Focus is quickly catching the Hondas in terms of market popularity.

This book shows Focus owners exactly what it takes to improve their car's performance, from simple modifications like installing a new air intake to radical mods like installing a turbocharger.
The author also shows what those modifications can do, with before-and-after dyno tests for each modification. There's also extensive info on suspension and brake modifications for better handling and braking. It's a one-stop shop for those who want a sharper, faster Focus.

Presentación:128 páginas, 27.5 x 21.5 x 1 cm, tapa blanda
Ilustración:215 fotos b/n
Editor:CarTech Inc (USA, 2009)
Serie:S-A Design (SA90P)
EAN:9781932494907
Livre: Designing And Tuning High-Performance Fuel Injection Systems

Designing And Tuning High-Performance Fuel Injection Systems

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Engine Management: Advanced Tuning

de (Autor)

Ce livre américain de S-A Design est consacré au réglage et la préparation des systèmes electroniques de gestion moteur (EFI).

Presentación:128 páginas, 28 x 21.5 x 0.8 cm, tapa blanda
Ilustración:200 fotos a color
Editor:CarTech Inc (USA, 2007)
Serie:S-A Design (SA135)
EAN:9781932494426
Livre: Engine Management: Advanced Tuning

Engine Management: Advanced Tuning

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

Technologie des injections électroniques et performances moteur

de (Autor)

Pour répondre aux exigences actuelles de performance, de faible consommation, de souplesse d'utilisation et répondre aux normes d'antipollution, le fonctionnement des moteurs actuels doit impérativement faire appel à une gestion électronique de l'allumage et de l'injection.
Pendant plusieurs années, les Automobiles Peugeot ont confié la direction de la mise au point de ces moteurs à L. Benoit, ingénieur ENSEM (École Nationale Supérieure d'Électricité et de Mécanique).

Fort de cette expérience acquise et avec une démarche très pédagogique, l'auteur nous permet de comprendre les principes et le fonctionnement des différents mécanismes qui sont à la base de l'efficacité des systèmes de contrôle du moteur. L'allumage, la combustion, l'injection, les techniques antipollution sont analysées et largement développés. Le dernier chapitre, en guise de conclusion, est consacré aux performances du moteur.

Cet ouvrage, sérieusement documenté, conjuguant théorie et pratique industrielle, est actuellement la présentation la plus complète de l'ensemble des thèmes.

Presentación:220 páginas, 27 x 21 cm, tapa dura
Ilustración:abundantemente ilustrado con fotos y dibujos
Editor:ETAI (F, 1996)
Serie:Manuel technique Pro
EAN:9782726882245
Livre: Technologie des injections électroniques et performances moteur

Technologie des injections électroniques et performances moteur

Idioma: Francés

Comprar en Amazon.com Comprar en Amazon ES

How to Understand, Service and Modify Bosch Fuel Injection & Engine Management

de (Autor)

This is the authoritative handbook on Bosch Fuel Injection and Engine Management Systems. This is the only manual that fully explains aspects of the most widely installed Bosch systems, including specific technical information on the newest KE-Motronic and LH-Motronic systems that is not available from any other source.
Bosch Systems covered: Motronic, LH-Motronic, L-Jetronic, LH-Jetronic, KE-Jetronic, KE-Motronic, K-Jetronic and D-Jetronic.

Author Charles Probst has worked directly with factory engineers and technicians from Bosch, Porsche, BMW, Mercedes-Benz, Volkswagen, Audi, and other manufacturers to produce down-to-earth but detailed technical literature for real-world technicians. Now complete service and maintenance procedures, with Charles's expert advice and troubleshooting tips, are available to you.

Charles clarifies advantages and operating principles of each Bosch system and explains how they work. He also gives you high performance tuning secrets that really work for street and racing applications, and tells you why some tricks, like "fooling" the computer, don't.
With over 350 illustrations and photos, this 224-page book is a must-have reference for do-it-yourself mechanics, performance enthusiasts, and professional technicians who want to understand Bosch systems.

Presentación:224 páginas, 28 x 21.5 x 1.6 cm, tapa blanda
Ilustración:350 fotos y dibujos
Editor:Bentley Publishers (USA, 1989)
EAN:9780837603001
Livre: How to Understand, Service and Modify Bosch Fuel Injection & Engine Management

How to Understand, Service and Modify Bosch Fuel Injection & Engine Management

Idioma: Inglés

Comprar en Amazon.com Comprar en Amazon ES

< Volver arriba >




Pericia y experiencia

Desde el año 2000 la librería TMB importa libros técnicos de Haynes, ETAI, Chilton, Clymer, Brooklands, Bucheli, Motorbuch Verlag y otras editoriales de renombre.

  • Gran selección de más de 12.000 títulos
  • Entrega rápida
  • Embalaje fuerte
  • ¡Ordenar es fácil! ¡No necesita crear una cuenta!
  • Pago seguro mediante transferencia bancaria a través de su propio banco. ¡Para ordenar, no necesita una tarjeta de crédito!
  • El día del envío le enviaremos otro correo electrónico con el número de paquete, para que pueda rastrear su pedido en Internet.
  • Respetamos la privacidad.
  • Nuestros socios logísticos:





Última actualización:17-03-2023