Chrysler V6 y V8 Small-Block: manuales de taller y revistas técnicas - reparación y revisión

Manual americano Haynes TechBook para la revisión de motores de gasolina Chrysler. Cubre los tipos:
- V6 - 3.9 L (serie LA, 1958-1978)
- V8 Small-Block - 273, 318, 340 y 360 cu in (serie LA, 1964-1994)
- V8 Big-Block - 361, 383, 400, 413, 426 y 440 cu in (series B y RB).

• Más de 300 fotos y instrucciones paso a paso para la remoción e instalación del motor así como la revisión completa (distribución, árbol de levas, válvulas, culata, pistones, bielas, cigüeñal, bloque de motor, sistema de lubricación).
• También da consejos para la identificación, las herramientas necesarias e instrumentos de medición.

Revue technique américaine S-A Workbench pour la révision complète des moteurs à essence Mopar Small-Block V8 des années 1964-2003, comme installés dans les voitures, les camionnettes et les pick-ups Dodge, Plymouth et Chrysler (Barracuda, Charger, Dakota, Ram et autres modèles).

Versions :
- LA 273 (1964-1969), LA 318 (1967-1991), LA 340 (1968-1973) et LA 360 (1971-1992)
- Magnum 5.2 L (1992-2001) et Magnum 5.9 L (1993-2003).

• Les instructions pas à pas et 600 photos vous montrent d'une façon très claire les travaux aux moteurs Mopar Small-Block V8 essence.
• Des chapitres consacrés à la planification, le démontage et l'inspection, le nettoyage, le choix des pièces correctes, l'usinage, l'assemblage du moteur, le premier démarrage et le rodage.
• Couvre le bloc moteur, le vilebrequin et les pistons, le système de graissage, les arbres à cames, les culasses, la distribution, l'allumage, le système de carburant et les carburateurs.
• Complet avec des données de réglage, comme le jeu des soupapes et les couples de serrage.
• Ce livre donne aussi des conseils utiles pour l'amélioration de la fiabilité et la performance.

Un livre de Brooklands consacré aux moteurs Chrysler-Dodge-Plymouth Small Block V8 avec une cylindrée de 273, 318, 340 et 360 cu in.

Les 24 articles, parus à l'époque dans le magazine américain 'Hot Rod Magazine', donnent beaucoup d'information sur le blueprinting, la préparation, la modification des culasses, la révision et la restauration.

The Chrysler LA-series and Magnum small-blocks are powerful, efficient, and quick-revving engines that have dutifully powered millions of Chrysler/Dodge/Plymouth cars and trucks from 1964 to 2003. And the LA engine is also the powerplant for many classic Mopar muscle cars, including the Charger, Barracuda, Challenger, Dart, and others.

The LA designates the small-block as "Lightweight A," which was a huge improvement over the previous generation. With its compact size, 50-pound weight savings, thin wall casting, and wedge heads, it cranked out a lot of torque and horsepower, so it was formidable competition on the street and track.
The LA was offered in 273-, 318-, 340- and 360-ci inch iterations, and a full range of aftermarket products are offered for these engines. By 1992, the LA engine platform had evolved into the Magnum 5.2- and 5.9-liter engines and became the new standard of Mopar small-block performance.

While these venerable small-blocks have delivered impressive performance in stock trim, both can be easily modified to produce much greater power for almost any application. Hit the horsepower goal of your Mopar small-block engine using this guide that identifies the best parts and techniques to extract maximum performance from LA and Magnum powerplants.

Mopar engine expert and author Larry Shepard covers heads, cams, and valvetrain products and modifications that will give you more power. In addition, he provides exquisite details and in-depth buildup instruction for other essential components: blocks, cranks, pistons, rods, ignition systems, intakes, carburetors, and exhaust.
If you own an LA small-block-powered Mopar car or truck, this invaluable guidance and instruction will allow you to optimize performance and maintain reliability.

At one time, if you wanted big horsepower in your Mopar muscle car or truck, your choices were limited to a big-block swap or a coveted Hemi. At the very least, you needed different engine mounts, K-members, transmissions, headers, etc. - and Hemis have never been cheap!
But now there's another way to get more horsepower: boring and stroking your Mopar small-block to get more cubic inches - up to 476 cubes! The small-block Mopar is one of the easiest engines in which to increase displacement without extensive modifications or specialized machine work; the engine was practically designed for more cubes!

This book shows you how to get that big-cube power, and then it shows you how to optimize the small-block's other systems - induction, heads, valvetrain, ignition, exhaust, and more - to make the most of the extra cubic inches.

Author Jim Szilagyi is a Performance Specialist for Dodge Motorsports and Mopar Performance Parts.

In this book he covers building big-inchers from Mopar 318/340/360 cu ini LA or Magnum 5.2-/5.9-liter engines, using both factory and aftermarket parts. If you want to make big power from your Mopar small-block, this is the book for you.

A completely revised, updated edition of Larry Shepard's classic, first published in 1989. Inside you'll find the latest, updated information to help modify your small-block A series Mopar for high performance, street, circle track, or drag racing.

Covers all Mopar A engines 1964-1992.

Also included are updated parts information and techniques for:
- Block, cranks, pistons and rods
- Cylinder heads
- Camshafts and valvetrain
- Blueprinting techniques
- Step-by-step engine assembly guide
- Oil, cooling, ignition and induction systems
- Engine swapping guide
- Engine installation and break-in tips
- Casting numbers and torque specs

New part numbers, photos, parts combinations and illustrations highlight this classic handbook on how to build the ultimate small-block Mopar engine.